The connect name is now displayed in the network adapters list.Fixed bug: On some systems, WakeMeOnLan failed to detect correctly the active network adapter for scanning.When using the combination of /scan and one of the save command-line option ( /scomma, /shtml, and so on.) the 'Status' field is now updated according to scan result.Į.g: WakeMeOnLan.exe /scan /shtml c:\temp\status.html.If the name cannot be resolved, the IP address displayed in the 'IP Address' column will be used. If you choose this option - For every computer you wakeup, WakeMeOnLan will try to resolve the name of the computer/device ('Computer Name' column) to IP address and then send the wakup packet to this IP address. Added new option to 'Send The Wake-on-LAN Packet To.': 'Name of the device'.Removed the 'Use Broadcast Address According to IP Address' menu item, which was inactive since version 1.70.Fixed bug: WakeMeOnLan failed to remember the last size/position of the main window if it was not located in the primary monitor.Possible addresses (Broadcast Address 255.255.255.255, Broadcast Address According to IP Address, IP Address of the device) Added 'All Possible Addresses' to the 'Send The Wake-on-LAN Packet To.' option, which simply causes WakeMeOnLan to send Wake-on-LAN packets to all.Updated the internal MAC addresses database.In the network card properties, you should go to the 'Power Management' and/or 'Advanced' tabs of the networkĪdapter, and turn on the Wake-on-LAN feature.ĭownload links are on the bottom of this page.On some computers, you may need to enable this feature on the BIOS setup.In order to enable the Wake-on-LAN feature on the remote computer: WakeMeOnLan can turn on the remote computer only if this feature is supported and enabled on the remote computer.īe aware that Wake-on-LAN feature only works on wired network. Windows 2000 and up to Windows 10, including 圆4 versions of Windows. On the computer that you run WakeMeOnLan: WakeMeOnLan works on any version of Windows, starting from.If you have this problem, you should set this option to 'Broadcast Address According to IP Address'. On some Windows 10/8 systems, the Wake-Up feature doesn't work if the 'Send The Wake-on-LAN Packet To.' option is set to 'Broadcast Address 255.255.255.255'.WakeMeOnLan also allows you to turn on a computer from command-line, by specifying the computer name, IP address, or the Later, when your computers are turned off or in standby mode, you can use the stored computers list to easily choose the computer you want to turn on,Īnd then turn on all these computers with a single click. When your computers are turned on, WakeMeOnLan allows you to scan your network, and collect the MAC addresses of all your computers, and save the computers list into a file. This utility allows you to easily turn on one or more computers remotely by sending Wake-on-LAN (WOL) packet to the remote computers. NK2Edit - Edit, merge and fix the AutoComplete files (.NK2) of Microsoft Outlook.WifiInfoView - WiFi Scanner for Windows 10 / 7 / 8 / Vista. Uncheck Turn on fast startup in the Shutdown settings section.Select Change settings that are currently unavailable.Select Choose what the power buttons do.If the Intel NUC won't Wake on LAN after completing the steps detailed above, try disabling Fast Startup in Windows: Select Allow this device to wake the computer and any other desired options.Make sure Wake on Magic Packet is enabled (this is the default setting).Expand the Network Adapters section and double-click the Wireless device.Select Wake on Magic Packet and any other desired options within the Wake on LAN section.Ĭonfigure Wireless Wake-on-LAN in Windows® 10.Expand the Network Adapters section and double-click the desired Ethernet adapter.Open Device Manager by selecting the Windows button and typing, Device Manager.Press F10 to save and exit the BIOS Setup.Ĭonfigure Wired Wake-on-LAN in Windows® 10.Within Secondary Power Settings check to make sure Wake-on-LAN from S4/S5 is set to: Power On - Normal Boot (this is the default setting).Select Advanced, then select the Power menu.Press F2 during boot to enter BIOS Setup.Devices that do support Wireless Wake-on-LAN only support wake from system sleep states S3 or S4.įor WoL to function, your computer's BIOS and operating system need to be setup correctly.Ĭlick or the topic for details: Enable Wired Wake-on-LAN in the BIOS For NUCs with Visual BIOS.Not all devices support Wireless Wake-on-LAN.Wake-on-LAN can be configured to use Ethernet or Wireless. The computer must have an Internet connection and be plugged in to power for WoL to work. Wake-on-LAN (WoL) is a hardware/software solution that wakes up your computer remotely from a low power mode or off mode.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |